Tack & Supplies

This fixed cheek leverage bit is well suited for a finished horse. This shank creates lateral flexion and provides hip control which allows the horse to maintainbalance while keeping their shoulders elevated during turns.The three piece twisted dog-bone mouthpiece allows for more control than the smooth version.Mouth: 5 3/4" Cheek: 6 3/4"

Read more less

This fixed cheek leverage bit is well suited for a finished horse. This shank creates lateral flexion and provides hip control which allows the horse to maintainbalance while keeping their shoulders elevated during turns.The three piece smooth dog-bone with a copper roller mouthpiece is comfortable as it lies across the tongue. The smooth bars offer a softer feel. Copper roller provides entertainment for a busy horse and promotes salivation.Mouth: 5 3/4" Cheek: 6 3/4"

Read more less

3 Piece Leather Curb Strap has a flat, Doubled and Stitched leather center that lays flat against the horses chin.  Made of Harness leather and Stainless Steel hardware

Read more less

The 7 Shank has quite a bit of weight behind the mouthpiece, which allows a quick release from the rider’s hands.  This is an excellent transition bit out of an O-ring or D-ring.  The square port is more aggressive than the traditional rounded port because you are working off the corners of the mouth.  The twisted bar pieces are more aggressive.   Mouth: 5 1/8" Cheek: 6 1/2" Port: 1 1/2"

Read more less

Myler Stainless Steel 6 3/4" MBL Medium Shank, MB 43MP Narrow Medium Ported Barrel, Level 2-3 The MB 43MP does not rotate onto the tongue but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. The MB 43MP is the mildest of the Level Two-Three mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece. Sweet Iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece does not pinch lips and bars Copper Inlay Notes: For more tongue pressure, see the MB 27LP. For more tongue relief, see the MB 41PB. For slightly less tongue relief or a lower port, see the 43LP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 47 and MB 47PB. For the Level 3 version of this mouthpiece without Independent Side Movement, see the MB 12 or MB 98. The MBL Shank is a length of flat stainless steel curved slightly back towards the horse, with a teardrop purchase and a rein ring. The mouthpiece attaches loosely to the cheek with a small decorative stack that allows ⅛" of slide, just enough to allow more tongue relief. The purchase is angled slightly away from the cheek to avoid rubbing. The MBT has the patented Independent Swivel Cheek, where the purchase, mouthpiece, and shank all move independently of each other. The MBL is an indirect (curb) rein action designed to be used with a curb strap that attaches to the purchase. The MBL uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin, and poll. Recommended for use with ported mouthpieces.

Read more less

Myler Stainless Steel 5" HBT Shank, MP 43LP Narrow Low Ported Barrel, Level 2-3 The MB 43LP does not rotate onto the tongue but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ¼" high, so it will apply little to no palate pressure. It is the mildest of the Level 2-3 mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved Mouthpiece does not pinch lips and bars Copper Inlay Notes: For more tongue pressure, see the MB 27LP, MB 27PB, or the MB 41PB. For more tongue relief, see the MB 43MP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 47 or MB 47PB. For the Level 3 version of this mouthpiece but no Independent Side Movement, see the MB 12 or MB 98. The 5" HBT shank is stainless steel and is slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece, and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.

Read more less

Myler Stainless Steel 7" Flat Shank, MB 27PB Correctional Low Ported Barrel, Level 2-3 The MB 27PB is a Myler correctional mouthpiece, which is a ported mouthpiece that collapses on to the outer lip and bars, and rotates onto the tongue. The port, although narrow and somewhat low, allows room for the horse’s tongue to pass under the bit. When the reins are engaged and the mouthpiece rotates onto the tongue, it applies two concentrated points of pressure on the tongue for quick control. Because this port is only 1 ¼" high, it will apply little to no palate pressure. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved mouthpiece Copper Inlay Notes: For more tongue relief, see the MB 41PB. For the same mouthpiece without Independent Side Movement, see the MB 27LP. For a non-correctional version offering more tongue relief, see the MB 43LP. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece, and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap that attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.

Read more less

Myler Stainless Steel 7" Flat Shank, MB 01 Comfort Snaffle with Narrow Barrel, Level 1 The MB 01 is the Myler alternative to the traditional single-jointed mouthpiece commonly used in snaffle bits. The MB 01 rotates onto the tongue to apply concentrated tongue pressure at the center barrel, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional single-jointed mouthpiece. However, the barrel distributes the pressure more kindly and allows for each side of the bit to be used independently. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: The mouthpiece is similar to the MB 02, but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece, and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap that attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin, and poll.

Read more less

Myler Stainless Steel 5" HBT Shank, MB 47PB Correctional Ported Barrel, Level 2-3 The 47PB is a correctional mouthpiece, a ported mouthpiece that collapses onto the outer lip and bars and rotates onto the tongue. The port is narrower than a Level 3 mouthpiece but offers plenty of room for the horse’s tongue to pass under the bit. The angles of the port are rounded, so when the bit collapses and applies two points of pressure on the tongue, the pressure is mild. The port on this mouthpiece is 1 ⅞" high, so it will apply some palate pressure. Sweet Iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved mouthpiece does not pinch lips or bars Copper Inlay Notes: A horse with a thicker tongue or lower palate will feel more palate pressure. This mouthpiece is the correctional version of the MB 43HP and is identical to the MB 47 but with the added benefit of Independent Side Movement. For increased tongue pressure and the same palate pressure, see the MB 27PB or MB 27PB HP. For more tongue relief with the same palate pressure, see the 43HP. For less tongue pressure and little to no palate pressure, see the MB 43LP or MB 43MP. For the same mouthpiece but without Independent Side Movement, see the MB 47. The 5" HBT shank is stainless steel and is slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece, and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap that attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin, and poll.

Read more less

Myler Stainless Steel 7" Flat Shank, MB 27 Traditional Correctional, Level 2-3 The MB 27 is a traditional correctional mouthpiece, which has a ported mouthpiece that collapses onto the outer lip and bars and rotates onto the tongue. This mouthpiece has a 2" port and is identical to the MB 27PB HP, except that it does not have Independent Side Movement. Sweet iron mouthpiece oxidizes and encourages salivation. NO Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Copper Inlay Notes: For the same mouthpiece with a lower port, see the MB 27LP. For the same height port but with Independent Side Movement, see the MB 27PB HP. For the same mouthpiece with Independent Side Movement™ but a lower port, see the MB 27PB. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece, and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap that attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin, and poll.

Read more less

This shank will give more leverage while maintaining a soft feel. A step up from the short shank allowing the rider to move forward to the next level of training. All of these bits should be adjusted to fit with one wrinkle in the horse's mouth and a loose curb strap to allow 2-3 fingers. This mouthpiece is a nice transition from a snaffle. The mild copper wire twist applies a more concentrated pressure to the bars and promotes more break at the poll, lateral movement and collection.NOTE: This bit will rust when exposed to moisture. This creates a sweet taste in the horses mouth and promotes salivation.

Read more less