Bits & Curbs
Toklat Myler: 89-11505 Flat Shank with Medium Wide Low Port MB 05 with Copper Roller
Myler Flat Shank with Low Medium Wide Port MB 05 with Copper Roller, Level 3 The MB05 is one of the mildest Myler mouthpieces in terms of tongue pressure. The generously wide port allows room for the tongue to pass under the bit. However, unlike the solid MB 33, the MB 05 collapses slightly although it does not fully rotate on to the tongue like a Level 1 or Level 2 mouthpiece. This gives the mouthpiece more give and may apply some light tongue pressure although it works primarily off the lips and bars. The port on this mouthpiece is only 1 ¼"" high, so it will apply little to no palate pressure. Because the MB 05 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Notes: For a slight increase in tongue pressure, see the MB 43LP. For similar tongue relief without Independent Side Movement, see the MB 12. For the same tongue relief and Independent Side Movement, but with no collapse, see the MB 33. For more tongue relief, see the MB 16PB. The 7"" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate
$196.95
Circle Y Of Yoakum Josey Mitchell Long Shank Lifter w/ Mullen
Looking for a little extra lift? The 0150-0000 Josey-Mitchell Long Shank Lifter with Mullen Relief is here to help! A solid, sweet iron mouth combined with 8 1/2" shanks can package a horse up to keep him collected and quick in turns and correct an elevated nose or a dropped shoulder. Tightening the curb chain will increase the leverage of both shoulder lift and rate. Martha Josey is quite the legend within the barrel racing industry through her vast accomplishments and highly sought-after year-round clinics. She is an 11-Time NFR Qualifier in Barrel Racing, 1980 NFR World Champion, WPRA and NBHA Champion, Olympic Gold Medalist Barrel Racer, and World-Renowned Clinician. Martha and her team took their time designing each bit in her line to aid in the development and growth of each one of her students. "These bits have proven themselves, not only in our Josey clinics, schools, and seminars but also in competitions worldwide." - Martha Josey
$69.99
Professional's Choice PC Sunflower Correction
This Sunflower shank is 8” long. It delivers nice collection and leverage as well as the ability to keep the horse flexing and bending.
$117.99$111.99
Professional's Choice PC 7 Shank Floating Port Loose Rings
The 7 Shank has quite a bit of weight behind the mouthpiece, which allows a quick release from the rider’s hands. This is an excellent transition bit out of an O-ring or D-ring. The square port is more aggressive than the traditional rounded port because you are working off the corners of the mouth. The twisted bar pieces are more aggressive. Mouth: 5 1/8" Cheek: 6 1/2" Port: 1 1/2"
$116.95$110.99
Professional's Choice Bob Avila Santa Maria Medium Port
A great bit for bringing along a young horse, or for fine tuning a seasoned horse. This bit has the right amount of feel in a horse’s mouth and the port offers a great deal of tongue relief. Copper inlays keep the horse’s mouth moist. Really good all-around bit.
$149.95$141.99
Tom Balding Bits & Spurs TB Base S Low Correction
This beautifully crafted Baseline bit features a Medium S© shank in a satin finish. The mouthpiece is our Correction©. This shank measures 7 3/4".
$220.00
Tom Balding Bits & Spurs TB Base S Double Cross
This beautifully crafted Baseline bit features a Medium S© shank in a satin finish. The mouthpiece is our Double Cross©. This shank measures 7 3/4".
$220.00
Professional's Choice PC Curb Pineapple Knot Heavy Oil
Pineapple knot bit hobble/curb made from harness leather with latigo knots. Heavy Oil
$20.95
Equibrand Classic Snaffle D Ring Twisted Wire Snaffle
A necessity in any horseman’s toolbox, the D Ring Snaffle has a nice weight, balance, and feel. Its slightly heavier design not only makes it durable, but it takes a deliberate action to cue the horse. When released, the bit returns quickly to a resting state, providing release of pressure and adding consistency to your hands.
$109.99$99.99
Equibrand Classic Snaffle D Ring Smooth Snaffle SS
A necessity in any horseman’s toolbox, the D Ring Snaffle has a nice weight, balance, and feel. Its slightly heavier design not only makes it durable, but it takes a deliberate action to cue the horse. When released, the bit returns quickly to a resting state, providing release of pressure and adding consistency to your hands.
$109.99$99.99
Equibrand Classic Tool Box Bit 8" Cavalry Ported Twisted Wire
This final cheek in the Tool Box is designed for the finished performance horse or tough-mouthed older horses where more control is needed. It can be used as a schooling bit to get a horse that is not responding to milder bits to collect and break at the poll. It is also often used in competition, and should not be used for daily training. The purchase is 2-1/2-inch and the shank 5-1/2-inch. The Cavalry designed shank is angled back to the horse, but at a straighter angle than the 7-1/2-inch model, causing a quicker, more immediate response. The purchase/shank alignment ratio increases leverage, creating greater realized pressure to all points of contact.
$109.99$99.99
Equibrand Classic Tool Box Bit 7.5" Ported Twisted Wire
The 7-1/2-inch cheek style is next in the lineup. Extremely versatile, this bit can be used for training drills, pleasure riding, or competition. This cheek has a 2-1/2-inch purchase with a 5-inch shank. The shank is swept back, like the 6-inch model, but to a lesser degree, which offers more leverage and control. When properly adjusted, it is still considered a mild cheek, but one with plenty of leverage for control at increased speeds. The Low Port Barrel is a highly universal bit that works well for anything from training to pleasure riding to competition. When engaged, the low port provides tongue relief as slight pressure is applied to the bars of the mouth and to the palate. Each side works independently from the port for increased lateral flexion.
$109.99$99.99